43Pc Paintless Hammer Kitv, Dent Removal Puller Lifter Dent Tool Line Board Repair (4 Series)


SKU: 60095229 Category:


43Pc Paintless Hammer Kitv, Dent Removal Puller Lifter Dent Tool Line Board Repair (4 Series). Description: 1. Save time, save money. No need to pay for repairs to the body shop! 2.Car charger Glue gun and glue sticks included, do not need to purchase glue gun and glue sticks additionally. 3.Clean the damaged surface with a clean cloth. 4.Put the glue stick to the gun and connect the power source and preheat for 5-10 minutes. 5.According to the dent size to choose the Glue Puller Tab, then put the heated glue on the puller tab, immediately place the puller tab in the center of the dent and hold on until it sticks. 6.Let the glue tabs cool for about 2-3 minutes. 7.For the large dent, use the T-shaped repairer, and press the drawing gasket with hot melt glue, pull the sliding rod backward to pull up the dent. For small-medium dent, use the bridger puller. 8.If a dent still exists, knock it slightly with a flattening hammer with Tap down the head. 9.When the dent was removed, clear the glue with alcohol with a plastic shovel. 10.Repeat the operation steps above until the dents are repaired. Packing list: 1. 1 x Car charger plug glue gun 2.10 x Yellow hot melt glue sticks 3.1x Bridge puller 4.6 Bridge puller glue tabs 5.1x small T bar dent puller 6.12 x Black glue puller tabs 7.4 x Yellow glue puller tabs 8.1 x Rubber hammer 9.5 x Black plastic tab down the pen 10.1 x Glue shovel 11.1 x Empty alcohol bottle1 12.1 x pair of gloves 13.1 x Instruction Note: 1. Before use it, please remember to clean the dent place of the car with blue cloth. 2.Easy to use: Please read the instruction in the package carefully 3.If there are any problems during use, please contact the seller on time.